Best Exhaust Shop

[ptim]

Does anyone know of a good Exhaust Shop here in Tallahassee.

[RACER1269]

CarsPlus over here on LakeBradford Rd 575-2086
ask for mark, tell them Scotty recomended them.

[4348rd]

Also adams street service center

[Osceola16]

Does anyone know of a good Exhaust Shop here in Tallahassee.
If ya cant find a reasonable one in tally, theres an awesome one 45 minutes away, here in good ole' perry.

Cribbs Tires
584-3883
ask fer greg

If your not wanting to travel.....^disreguard..

[Bullhead00]

If ya cant find a reasonable one in tally, theres an awesome one 45 minutes away, here in good ole' perry.

Cribbs Tires
584-3883
ask fer greg

If your not wanting to travel.....^disreguard..
Agreed! Greg is the man and totally stands by his work.

[brandboZ28]

Ive heard RBPower here on the board knows his way around a welder.

[shock6791]

I used Jones on Springhill and they did a great job on my car and Dave (my roommate) who drives a prelude. But, he recently switched his exhaust setup.

[Baldy]

Also adams street service center
Have you had work done by them? How did it turn out? I had them do my exhaust, they got the job done at a low price; but it looks horrible, hangs a bit low, and could flow better. (I went to them because I was told they'd rip out cats without any hassle)

[4348rd]

Have you had work done by them? How did it turn out? I had them do my exhaust, they got the job done at a low price; but it looks horrible, hangs a bit low, and could flow better. (I went to them because I was told they'd rip out cats without any hassle) should have talked to them they done a trans am , a camaro, a gmc truck, and my other ,chevelle ,yes they will clean out the converter (shhhhhh.) also always been great , maybe I'M special :shrug:

[RACER1269]

yeah i would be sure of what you have going on with Adams St .... they are good for cheap and they know how to skin a cat. but that is all i would use them for.
yeah 4348 id say your special. they must have liked you or something.
jones electric is good also. im sticking with CarsPlus tho mark is known for making alot of headers for race cars too. he is qualified. :lol:

[BreBar21]

If ya cant find a reasonable one in tally, theres an awesome one 45 minutes away, here in good ole' perry.

Cribbs Tires
584-3883
ask fer greg

If your not wanting to travel.....^disreguard..


+1. Greg welded my subframes and I have nothing but praise for him.

[4348rd]

I have had other work done by jones but didn't know they did exhaust

[J8127]

I dont know what setup you want, but Cribbs cannot bend 3" pipe, or at least he couldn't when I called them a few months ago.

Me, Jeremy, Dan, and Lewis all had our exhaust done at Tire Town and Muffler.

[Tally TransAm]

most place dont stock 3" pipe, alot of places cant bend 3" pipe, and no places have a mandrel bender

[J8127]

Tire town and muffler stocks and bends 3" pipe, but you have to go to jacksonville or down south for a mandrel bender

[Tally TransAm]

there is actually a mandrel bender in valdosta, I THINK.

[cary00silve]

Also adams street service center
You can't be serious! Everyone who works there is a crack head. I was there one day while they were putting dual exhaust on a caprice. The fucktard was using a cutting torch to cutoff the old exhaust and burnt through a fuel supply line. I then watched for two hours as he tried to put a piece of rubber carburetor fuel line over the burnt line. This guy couldn't figure out why fuel kept spraying everywhere when he turned the key on. This place is good ONLY for cutting off cats. Only use this place is you want something illegal and cheap.

[slmdLS1]

Does anyone know of a good Exhaust Shop here in Tallahassee.

Jones has done good work for me, and wont give you a reciept if you dont want cats, like most other places. ive also used cars plus twice and adams st once. edit: carry is correct they are ghetto. i was there to watch him fix a leak, dunno how much that matters to you though.

[ptim]

Does anyone know of a good Exhaust Shop here in Tallahassee.

What about the old Midas shop which now OTC on North Monroe St. Any comments on this place.

[4348rd]

You can't be serious! Everyone who works there is a crack head. I was there one day while they were putting dual exhaust on a caprice. The fucktard was using a cutting torch to cutoff the old exhaust and burnt through a fuel supply line. I then watched for two hours as he tried to put a piece of rubber carburetor fuel line over the burnt line. This guy couldn't figure out why fuel kept spraying everywhere when he turned the key on. This place is good ONLY for cutting off cats. Only use this place is you want something illegal and cheap.
it has been over a year for me and the guy that done mine only worked on saturday doing exh. worked for a dealership during the week

[RACER1269]

4348 i think your right bout that ...seems like there used to be a good guy that work there but the other guys seems to be more on the right page course i gotta watch what i say , they are customers of ours lol.

car plus im sure stil lhas 3 inch if that is your flavor.

there is rumored a guy in town that has a mandrel bender as well. but it is like for his personal use not a business. :shrug:

[Osceola16]

If three inch is what you want, theres a place in perry that does it...No mandrel bends though.

3 inch Exhaust (http://www.tallahasseemusclecar.com/forum/showthread.php?t=8373&highlight=inch+exhaust)

[4348rd]

I have a first cousin that works there named Ronald

[Osceola16]

I have a first cousin that works there named Ronald
@ yarbrough?

[4348rd]

@ yarbrough?
yep, last name gillis

[Osceola16]

yep, last name gillis
I know em...Well i know of em, seen em up there i think.

any relation to bryan gillis?

[4348rd]

I know em...Well i know of em, seen em up there i think.

any relation to bryan gillis?
that may be his son we don't see much of each other

[StateRoad20]

i'd definatly go with jones as well
they did my 3in...crush bent of course, but it works damn well

[Tally TransAm]

there is rumored a guy in town that has a mandrel bender as well. but it is like for his personal use not a business. :shrug:


i really dont think anyone in tallahassee is gonna buy a $150k machine for personal use only

[redmach1]

i really dont think anyone in tallahassee is gonna buy a $150k machine for personal use only
ditto

[scooby]

i like car plus they did my honda my trans am and my truck and i am going to have them do my camaro too there great and have a good price cecil or mark will hook you up.