J8127
07-29-2005, 08:59 PM
I don't know if Pulley Boys ( www.pulleyboys.com ) makes anything for you guys (maybe the Cobra/Lightning people, not sure) but I still want to share this.
A week ago, Jeremy and I put on my 3.4 pulley with a used pulley boys puller. With about 2" left to go, the threads stripped (our fault) and we had to hammer the pulley on enough so it wouldn't throw a belt.
I contacted Pulley Boys and got in touch with Brian, who helped me with the whole situation. I needed to order some replacement bolts/washers for the puller so we could fix the pulley, after I told him we had to hammer it on he said I may not be able to get it all the way back on, "but don't worry, I got ya covered"
He also discounted me from $35 + shipping for the replacement package, to $25 shipped.
3 days later his package arrives as well as my order from ZZP. I opened it up and sure enough, he sent me a brand new Pulley Boys press on 3.4" pulley, free of charge.
He also sent me some instructions for the puller, as well as some notes he had written himself to make it easier.
About 45 minutes later I had gone from a used, damaged 3.4 on the stock belt that had 70k miles on it, that wasn't even on all the way (it actualy hung a rib off the crank) to a brand new 3.4, an oversized zzp tensioner, a gatorback belt, and everything is on perfect.
Brian sent me almost $100 worth of stuff for $25, and went out of his way to make it easier to use. If they make anything for your car that you need, I reccomend them 110%.
A week ago, Jeremy and I put on my 3.4 pulley with a used pulley boys puller. With about 2" left to go, the threads stripped (our fault) and we had to hammer the pulley on enough so it wouldn't throw a belt.
I contacted Pulley Boys and got in touch with Brian, who helped me with the whole situation. I needed to order some replacement bolts/washers for the puller so we could fix the pulley, after I told him we had to hammer it on he said I may not be able to get it all the way back on, "but don't worry, I got ya covered"
He also discounted me from $35 + shipping for the replacement package, to $25 shipped.
3 days later his package arrives as well as my order from ZZP. I opened it up and sure enough, he sent me a brand new Pulley Boys press on 3.4" pulley, free of charge.
He also sent me some instructions for the puller, as well as some notes he had written himself to make it easier.
About 45 minutes later I had gone from a used, damaged 3.4 on the stock belt that had 70k miles on it, that wasn't even on all the way (it actualy hung a rib off the crank) to a brand new 3.4, an oversized zzp tensioner, a gatorback belt, and everything is on perfect.
Brian sent me almost $100 worth of stuff for $25, and went out of his way to make it easier to use. If they make anything for your car that you need, I reccomend them 110%.