PDA

View Full Version : Z06 Dyno


Patrick
10-01-2005, 08:07 PM
Only thing it had done were LTs and redline synthetics.
http://lgmotorsports.com/gallery/albums/userpics/10001/Z06%20w%20Redline%20oil.JPG
brandboZ28
10-01-2005, 09:21 PM
Long live the pushrod motor!
tanglewood
10-01-2005, 11:47 PM
I'm assuming 2006?
Patrick
10-02-2005, 12:10 AM
I'm assuming 2006?

Correct.
Bullhead00
10-02-2005, 12:34 AM
He alread had headers on it!?!?
BreBar21
10-02-2005, 03:58 AM
Weak.
Bullhead00
10-02-2005, 11:03 AM
Weak.
Jealous much?
J8127
10-02-2005, 11:10 AM
slow :sstony:
tanglewood
10-02-2005, 11:39 AM
I would say way underated from GM...

How much are those crate motors? :wicked:
Rotorocious
10-02-2005, 11:42 AM
I would say way underated from GM...

How much are those crate motors? :wicked:
I want to say like $13,000

Just checked. yup.
Bullhead00
10-02-2005, 02:26 PM
I want to say like $13,000

Just checked. yup.
I've had dreams about the new Z06. I think I'm obsessed with it.
Rotorocious
10-02-2005, 07:53 PM
I've had dreams about the new Z06. I think I'm obsessed with it.
Well if you only have the 13 grand, for about 5-7 grand total you could put that motor in a $200 fiero haha. I know its not the same



Tangle...
EDIT:Yes approx. Just a estimate based on ls1 swaps ive seen. Didn't mean to ot the thread.
tanglewood
10-02-2005, 07:58 PM
Well if you only have the 13 grand, for about 5-7 grand total you could put that motor in a $200 fiero haha. I know its not the same

Or do you mean $18K - $20K total? :shrug:

You still have to buy the PCM and I would imagine a whole shlew of other things.
Bullhead00
10-02-2005, 09:14 PM
Well if you only have the 13 grand, for about 5-7 grand total you could put that motor in a $200 fiero haha. I know its not the same



Tangle...
EDIT:Yes approx. Just a estimate based on ls1 swaps ive seen. Didn't mean to ot the thread.
OR, I could put it in my Silverado. :tu:
Rotorocious
10-02-2005, 09:17 PM
OR, I could put it in my Silverado. :tu:
2700 lbs MR>trucko :D
Good numbers tho, but that motor is rediculously expensive.
Riceman
10-02-2005, 09:55 PM
mmmm 427 dry sump 7k redline goodness.

How many mutha fucka's a guy gotta kill to get one?
Bullhead00
10-02-2005, 10:08 PM
2700 lbs MR>trucko :D
Good numbers tho, but that motor is rediculously expensive.
Still though, LS7 Silverado has a nice ring to it.
Rotorocious
10-02-2005, 10:09 PM
Still though, LS7 Silverado has a nice ring to it.
LS7 anything would sound good to me
HeavyChevy3800
10-02-2005, 10:14 PM
LS7 anything would sound good to me

LS7 John Deere!
Bullhead00
10-02-2005, 10:41 PM
LS7 John Deere!
That'd be a mean ass tractor!
thetastelingers
10-03-2005, 01:59 PM
mmmm 427 dry sump 7k redline goodness.

How many mutha fucka's a guy gotta kill to get one?

I hear the going rate is $8,000 per person.
do the math.
boostedsvt
10-04-2005, 01:06 PM
the new zo-6 is a bad b*tch.
a moded one is going to hurt a lot of us cobra guys, and supra/viper/ and thing else feelings.
it is going to be hard to beat a 140 trap speed car( with mods, i can see this car hitting that 1/4 mph) from a roll on race.
Bullhead00
10-04-2005, 02:16 PM
A bone stock one with bone stock tires was trapping over 127mph.
17TH SVT
10-04-2005, 04:05 PM
for 75k ill buy a used ferrari
SloNLo_350
10-04-2005, 04:51 PM
for 75k ill buy a used ferrari
...and catch a serious beat down on both road courses and the drag strip from Z06's that still have warranties.

EDIT: and its $66,000 sticker... wait a while and the markup will go away.
brandboZ28
10-06-2005, 05:42 PM
http://www.digitalcorvettes.com/videos/data/510/3332c6zo6dyno-stock.wmv

:drool: