Thought I had it

[93zm6tally]

Found a wire that had been sliced by the serpentine belt and replaced it.... However still the high end miss and difficult idle. I guess it's in the cards for me to do an opti install. I can think of things that I would rather be doing on a weekend and all of them don't involve crawling under a car.:evil:

[Spinner]

You still have a stock MAF?

[Spinner]

Ehm, or do you even have a maf?

[brandboZ28]

Nope, 93's have no MAF. Yo Mark, Ill install your opti for ya and then you can do the things you would rather be doing:D

[slmdLS1]

you just wanna drive it bo

[brandboZ28]

Ive already driven it but hell yea I wanna drive it(thats not why I offered). That car is wicked fast!

[pendrgn]

only compared to yours... lol.. :)

j/k

[brandboZ28]

One day Ill have a fast car, Im re-thinking the T-56 swap and going for all speed so I might have something for ya pretty soon. :D

[Slush]

Originally posted by brandboZ28
so I might have something for ya pretty soon. :D

a blown up tranny?

[brandboZ28]

Originally posted by qball
a blown up tranny? no, I already have that:lol:

[CrazyBosnian]

Originally posted by pendrgn
only compared to yours... lol.. :)

j/k


LMFAO:lol: :lol:

[brandboZ28]

Originally posted by CrazyBosnian
LMFAO:lol: :lol: I dont even want to hear it from you, you used to drive a Cavalier with a fart pipe:lol:

[01COBRA]

Originally posted by brandboZ28
I dont even want to hear it from you, you used to drive a Cavalier with a fart pipe:lol:


LMFAO :lol: :lol:

[Tally TransAm]

i think its time for a carb manifold mark

[93zm6tally]

Yeah. I'm thinking a 1st gen with high revving sb chevy stroker. I want enough room under the hood so that I can put my lawn chair in the engine compartment when I want to work on it. This shit of working on an engine where the back third is under the cowl is just a fuckin PITA. One stinkin wire last night took about an hour, working from above and from underneath. :twisted: :twisted:

[brandboZ28]

Originally posted by brandboZ28
Yo Mark, Ill install your opti for ya Im serious

[93zm6tally]

What are you some kind of glutton for punishment? Or are you actually expecting payment of some sort.

[pendrgn]

you dont want to know what BO wants form you ;)

[Greg Kulbick]

Eek.

[93zm6tally]

Hey now. We are talking strickly business here...... You fuckin perverts?:lol: So what is it Bo, 1 case 2 cases?.. a whole keg?

[pendrgn]

Originally posted by 93zm6tally
Hey now. We are talking strickly business here...... You fuckin perverts?:lol: So what is it Bo, 1 case 2 cases?.. a whole keg?

last I check that was the oldest business in history... :)

[brandboZ28]

I wasnt expecting payment at all, I just like working on cars, especially our cars, thats the only way Im going to get better at it. Plus, thats 90% of a cam install and that will be in the works soon, very soon hopefully.:D

[93zm6tally]

Well, I'll put it to you this way. I just had an opti all the seals ordered from Jason Cromer overnight. I also got a pilot bushing for a clutch install. I've had a new spec clutch/pressure plate sitting in the box at my house and want to get that in soon too. At any rate I'm planning on doing the opti this weekend.

[93zm6tally]

BTW I'm pretty sure that I'm going to be going with a little more aggressive cam pretty soon as well. I'm thinking of either the GM847 or XE 230/236 series. When I do I'd be willing to let my existing cam go cheap, < 10k on it. (Comp Cams 305)

[brandboZ28]

XE 230/236:headbang: Ive been looking at that one for a while. I was gonna go with the cc305 but I see everyone stepping up so I figure Ill just do it right the first time. I dont really have anything going on Saturday(class got canceled again) so if you want to get it installed then, lemme know.

[93zm6tally]

Yeah either of those are good cams. In your case you'll need a stall for those to be driveable.

[93zm6tally]

Originally posted by brandboZ28
XE 230/236:headbang: Ive been looking at that one for a while. I was gonna go with the cc305 but I see everyone stepping up so I figure Ill just do it right the first time. I dont really have anything going on Saturday(class got canceled again) so if you want to get it installed then, lemme know.

You are on. I will buy the beer, and food for that matter.

[brandboZ28]

Cool, stall in planned on as well. Just let me know what time to be over there and PM me some directs and it will be good to go in a matter of hours, it could be 89 hours :oops: but we'll get it running.:) It only took me 4 hours to do mine the first time and it went off without a hitch so Im going or 3 1/2 hours this time. I dont know though, yours is a vented, I have to take my time with that one since I havent played with one of thse before.

[pendrgn]

I got a digital camera, call me, I want to film this... :)

[brandboZ28]

Originally posted by pendrgn
I got a digital camera, call me, I want to film this... :)

What exactly is there to film???:shrug:

Working on cars is one of the few things Im good at.

[Greg Kulbick]

Sure it is three intake leak fix tries boy.

I still think we should put some clips of us cursing and throwing tools in the garage on the video somewhere. A lot of people don't do their own work, show them we do.

[93zm6tally]

Originally posted by brandboZ28
What exactly is there to film???:shrug:

Working on cars is one of the few things Im good at.

Your g/f tells me otherwise. Perhaps you are too modest.;) I will call with a time as soon as I get the parts in hand. Theoretically they should be here tomorrow as I told Jason to ship them overnight. He told me that I was early enough to get them in todays shipment. :D

[slmdLS1]

make sure he sends you the right part and not a non-vented opti or some other bullshit....



who fuck confuses a lt1 bellhousing with and ls1 housing anyways, no fork setup and another bolt hole....looks totally different

[brandboZ28]

Originally posted by 93zm6tally
Your g/f tells me otherwise. Perhaps you are too modest.;) I will call with a time as soon as I get the parts in hand. Theoretically they should be here tomorrow as I told Jason to ship them overnight. He told me that I was early enough to get them in todays shipment. :D

Sounds good and I said that working on cars was one of the FEW things Im good at, not the only thing Im good at.;) :lol: