stuff it would be really cool if i could borrow

[Tally TransAm]

head swap is coming this weekend and there are a few tools i dont have that i would really love to borrow so i dont have to buy them


does any have:

- fuel line disconnect tool (i believe its 3/8 )

- three jaw pulley puller (like this (http://www.sears.com/data/product_images/tools/large/00946906000-dlv.jpg))

- torque wrench (i need one that goes to 250 and one that only goes to like 100)

- various 1/2" extensions (3" and 6") and a 1/2-3/8 adapter

- 10 mm box end rachet wrench (like this (http://www.sears.com/data/product_images/tools/large/00943367000-dlv.jpg) angled or flat)

that is about it i think

my roommate might have a couple of these and if he does ill take them off the list

but if anyone has any of these i could borrow i would REALLY REALLY appreciate it

gracias

[jlaw]

I have a set of metal fuel line disconnect tools that I bought when we did my tank and pump. They're in T's tool box but I'm sure he'll lend em to you.

[Slow ET]

take some pics

[Tally TransAm]

yup

[99mustang]

i have the jaw puller and 10mm wrench
i'll check on the 1/2 extensions

[brandboZ28]

If you cant get to T's, I have a set of fuel line disconnect tools if you want. I also have a standard 3/8's flat wrench that you are looking for. I know Greg has a 6", 1/2" extension and a torque wrench that he might let you borrow.

[Tally TransAm]

bo, what standard 3/8" flat wrench???


but for everything else, if you have anything i can borrow, PLEASE bring it to sonics on tues or the lot on fri

thanks guys

[brandboZ28]

My bad, I didnt explain that very well. Its the ratcheting wrench that you are looking for but its flat and in standard which when converted is a 3/8ths isnt it?

[96s10]

ryan, go to autozone. they have the loan a tool program. you'll have to put a deposit down but you get everything back. i borrowed a torque wrench last weekend. i had to put down 96 bucks but i got it back. if you can't find everything you need, try there.

off topic, are the fuel lines on the ls1 3/8th? i need to get some pipe and a bender and run some new lines. i just need to know what size.

[Tally TransAm]

on the autozone thing, i know they rent tools, problem is i just cut a check to insurance and dont have the 150 bucks for the deposit, i would have to borrow it from my roommate

on the fuel line thing, i dunno, just know the tool is 3/8". but 3/8" lines sounds familar

[Highway Hero]

I have a torque wrench that goes from 25-250 ft lbs. It is 1/2 " drive... Let me know if you need it.

[93zm6tally]

Ryan,

I have all of that with the exception of the three jaw puller, I have a two jaw that did work on my harmonic balancer, just a little awkward. Problem is I won't be at Sonics. I thought you were just doing heads, what do you need the puller for unless you are also doing a cam ??

[Tally TransAm]

swapping my timing chain

[slmdLS1]

you need it for the the p/s pulley too, right?

[Tally TransAm]

no

just take off the whole assembly

[slmdLS1]

i couldnt get that bracket off without pulling the pulley off....damn 3 bolts are so close behind the pulley

[Tally TransAm]

well lets hope thats not the case for me

[Bryan02TA]

i want a ride in this beast when you are done

[Tally TransAm]

friendly reminder, if you had any tools on the list i could borrow and your coming to sonic tonight, could you please bring them

[brandboZ28]

Originally posted by 97_Stang
i want a ride in this beast when you are done Me too!:twisted:

[Greg Kulbick]

If you want to, you can come rummage through my tools to see if you can find some stuff you need.