2006 GTO Cam, Headers

[Gt]

http://www.jawsracing.net/images/dynographs/johnp-gto-std.jpg

http://www.jawsracing.net/images/dynographs/johnp-gto-sae.jpg

john00's 2006 GTO
Lingenfelter CAI, Comp Cams, Kooks LT, IAT Relocate - Jaws Racing Tune

[Riceman]

That torque is rediculous...

[slowLX]

That torque is rediculous...Yes it is. I can't wait to see yours.

[redmach1]

Good job Tony



That torque is rediculous...

When is that monster going on the rollers?

[KillerSS]

Very nice numbers.

[SloNLo_350]

← needs to know cam specs.

[Greg Kulbick]

That cam is all wrong for you, I've got someone that will buy it, though.

[sstony]

← needs to know cam specs.


that's riceman's old set up. nice gain Tony!!

D--better stick to nights and weekends:p

[Riceman]

that's riceman's old set up. nice gain Tony!!

D--better stick to nights and weekends:p

Putting down more power too... That cam was great for overall driving, the torque is everywhere.

[DustnF]

← needs to know cam specs.

231/237 .589/.595 112 LSA +4

[slmdLS1]

very nice john!

[NotoriousGreaseMonkey]

Nice gain... Tony the tuning GURU does it again.

[LD50]

I think I wet myself when I heard the first dyno pull. Thanks guys especially Bond, Riceman and Tony!
As fun as it is to spin all gears i'm gonna need some tires. :D

Install pics and dyno vid (http://ld50live.com/gto/)

[KillerSS]

← needs to know cam specs.

No, no you don't!

[Dredz172]

nice numbers

http://ld50live.com/gto/10%20-%20O2%20Fun.jpg
^ happened to me also

[tanglewood]

Weak....

[SloNLo_350]

Ok, now I need an idle vid. I can't remember how Ryan's idled back in the day. Or better yet i just need to see it in person haha. Stock exhaust?

[sstony]

it sounded nasty!

[SloNLo_350]

it sounded nasty!
Hmm... I'll have to keep looking then.

[Riceman]

In this case, I think he means nasty in a positive way. I liked it anyway. The best compliment I got on it was "that thing sounds evil, man"

I couldn't have been more proud :cool:

[SloNLo_350]

Well I want something pretty tame. I've been watching videos and if it sounds anything like a C-cam then I'm fine with it. Nasty to me makes me think ↓
http://www.youtube.com/watch?v=CP5uefxVh8U

While that sounds freaking amazing, I don't want that much chop. But seeing as Tony has that little girly cam in his car, "nasty" must be relative haha.

[sstony]

get your cam and prepare for the beatdown chase.

if my commission at work keeps at a good rate, i'll be doing some modding this year:)

[Riceman]

It should be similar to the HPE C-cam. It's VERY close in specs to the Torquer 2 by a vendor who shall remain nameless because they're garbage.

[LD50]

Ok, now I need an idle vid. I can't remember how Ryan's idled back in the day. Or better yet i just need to see it in person haha. Stock exhaust?

I love it... has a nice chop and isn't too loud if you dont want it to be. The car shakes just a bit at idle. I'll post a vid later tonight. And yes its the stock catback.

[GoatFiddyone]

I have an C-2 I'm waiting to install. I am trying to save for supporting mods and do it all at once. Good numbers!! I'm shooting for just at 400 at the rear wheels.

[LD50]

Idle vid up (http://ld50live.com/gto). I also put up a .mp3 cause my webhost is sucking.

oh yeah .. a question: which set of numbers am i supposed to use for internet racing? :D

[SloNLo_350]

That's exactly what I'm looking for!! I'm back on board haha.

Mind if I copy it? Do either you or Ryan have the cam card?

[TurboStutr]

Nice numbers...and damn it's got a mean idle.

[SloNLo_350]

Oh, and what is the idle set at?

[LD50]

That's exactly what I'm looking for!! I'm back on board haha.

Mind if I copy it? Do either you or Ryan have the cam card?

NO! It's a 100% original setup and you can't copy it. :D

Here's the spec:

Serial # J 0392-06 Spec Card# 07575405
Part # 54-000-11 LS1 CHEVY LS1/GEN III '97-UP ROLLER
Core C54-11HH LS1 1997 UP 5.7 CORVETTE 5150 SEMI
Grind # LS1 3725R /3728R HR112 +4

Pm me your email and i'll forward the full specs. You going to the meet tonight? It's a little more beastly in person obviously so you might want to hear it. I may or may not go tonight, if not maybe tues.

Oh and Greg is right, this cam is all wrong for your setup.

[DustnF]

Bring it out! I want to hear that monster.

[SloNLo_350]

I was gonna get one spec'd for me, but that's exactly the size, sound, and power I wanted. I am back home (Ft Walton). The clutch isn't fully disengaging, so I brought it back to the shop that did it, so I won't be at the meet. Maybe we can get up sometime next week so I can check it out.

[KillerSS]

Dethklok owns. That is all.

[madmax]

Nice numbers! Damn. I want a new bumpstick now... of course, then the rest of my drivetrain would be broken :owned: