PDA

View Full Version : Well crap...


KillerSS
02-09-2008, 11:34 PM
As it turns out, the rear end is already on the way, and it's going to Dothan, because that's the closest UPS center that could accept it. So now, it looks like I'm going to be renting a truck to go pick it up and bring it back, however I still don't have a place to stash it/paint it/put it on. I'm going to end up pulling my fucking hair out...
BreBar21
02-09-2008, 11:35 PM
Jesus fuck. That sucks.
slmdLS1
02-10-2008, 02:25 AM
its fatkids fault.
KillerSS
02-10-2008, 08:20 AM
If I have to I'm going to put the bitch on in the parking lot, but seeing as it's a rearend and it'll probably be heavy as fuck so I'm gonna need more than Chase to get it out of a truck and onto the ground.
gsdave
02-10-2008, 08:21 AM
You'll be OK, two people should not have a problem with a rear end for a Camaro.
SloNLo_350
02-10-2008, 08:36 AM
You'll be OK, two people should not have a problem with a rear end for a Camaro.
I'm more of half a person.
gsdave
02-10-2008, 08:51 AM
haha...well I was 5'9" and about 145lbs when I took the rear end out of the trunk of my 70 Lemans by myself. Its not too terribly bad.
fatkid
02-10-2008, 09:54 AM
its fatkids fault.
I'm surprised UPS freight doesn't run through Tally.
sstony
02-10-2008, 10:02 AM
talk to travis.
slmdLS1
02-10-2008, 11:20 AM
I'm surprised UPS freight doesn't run through Tally.

mine was delivered to ryan at TK. :shrug:



so this is clearly your fault.
Greg Kulbick
02-10-2008, 11:36 AM
I just saw a UPS freight truck parked in front of a body shop on Monroe across from the tattoo shop on Friday.
fatkid
02-10-2008, 01:35 PM
Looks like KillerSS is being had.
slmdLS1
02-10-2008, 01:42 PM
you're in his packages.
KillerSS
02-10-2008, 06:02 PM
I know, it doesn't make any sense to me either, but it is what it is. In the long run, as long as I get the rearend I'll deal with the minor inconviences along the way. And Travis, if you're reading this, I know you have a loading bay and what not, but would it also be possible to do the swap there too? Shouldn't take more than a couple hours from what I've been reading on tech.
fatkid
02-10-2008, 06:35 PM
I know, it doesn't make any sense to me either, but it is what it is. In the long run, as long as I get the rearend I'll deal with the minor inconviences along the way. And Travis, if you're reading this, I know you have a loading bay and what not, but would it also be possible to do the swap there too? Shouldn't take more than a couple hours from what I've been reading on tech.
Any idea on how much the total weight is shipping wise?
KillerSS
02-10-2008, 06:49 PM
Any idea on how much the total weight is shipping wise?

I'll try to find out the details.
Patrick
02-10-2008, 08:03 PM
Got truck will travel - lemme know.
slowLX
02-10-2008, 11:54 PM
Sorry I didn't read this until now. Yes you can install it in the bay. I PM'd you my number.