What do yall think

[fatkid]

I was thinkin bout buyin this with the x-mas money i get or w/e i can srounge up. Does anybody no of anyone who has this or who has used one.


http://www.planetperformance.com/vehicle.search/?searchtype=d&sortorder=DAA&urlsubcategory=Computer+Tuning&productcategory=Venom+400+Control+Modules&sf1=PONTIAC&sf2=1996&sf3=FIREBIRD&sf4=5.7L

[Tally TransAm]

err

im weary of stuff like that

[fatkid]

Well then i might just save up and buy a BORLA catback.

[Slow ET]

waste-o-money

[slmdLS1]

get the cat back, get a tune when you get more mods done to warrant neading a tune

[97TA]

just a heads up, don't waste your money on an aftermarket maf, or hypertech. Porting your maf may be ok but if your computer doesn't like it they're real expensive to replace(unless you get a used one). If you ever get headers I would get longtubes or midlengths. Whatever you do don't get JBA's.

Been there done that( and not proud of it) :lol:

maf translator may help since they came from the factory with a target 11.8:1 afr from the factory.

If you want we can Atap it just to check things out.

[Signal 12]

Well then i might just save up and buy a BORLA catback.

.thgit si kcabtac alrob

Mike

[toofast]

that page on that venem looked like this to me

blahblahblahblahblahblahblahblahblahblahblahblahbl ahblablahblablahblahblahblahblahblahblahblablahbla hblahblahblahblahblahblahblablblahblahblahblahblah blahblahblaahblahblahbblahblahblahblahblahblahblah blalahblahblahblahblahblahblahblahblablahblahblabl ahblahblahblahblahblahblahblahblahblahblablahblahb lahblahblahblahblablahblahblahblahblahbla

its a gimmick that thing will work like crap buy something you know will free up some hp like exhaust or roller rockers

[fatkid]

thanks for the advice guys. Guess ill just save up for some borla or SLP Loudmouth, Or maybe some headers. Does anyone have a Aftermarket cam layin around i could get from em in a month or so to beef up the HP lil. Hey bo what kind of cam did u put in ur car. I guess while im lookin for the cam i mite as well look for some roller rockers to. Anyone got those?????

[Greg Kulbick]

Never buy anything from that website that you linked to and never ask Bo for cam advice.

[Tally TransAm]

hey greg, howd your cam install go????




hehehehehe

[17TH SVT]

dude chris dont just jump to the cam, do all the bolt-ons first. i made that mistake and now i am goin back to the stock cam. you end up losing power unless you have a lot of bolt-ons or some heads.

[FloridaZ]

dude chris dont just jump to the cam, do all the bolt-ons first. i made that mistake and now i am goin back to the stock cam. you end up losing power unless you have a lot of bolt-ons or some heads.

Werd.. Cold Air, TB Bypass, Long Tubes for starters

Oh yeah LT's take a lot of :qball: to install

[DustnF]

96_ws6 are you ready to "run" your new toy yet?

[SteedaRR]

96_ws6 are you ready to "run" your new toy yet?

you bastards.... are you trying to get "another one"


go for it sert!!!!!!!!! :funny:

[Greg Kulbick]

hey greg, howd your cam install go????




hehehehehe


You participated in that install too, ass.

[DustnF]

96_ws6 are you ready to "run" your new toy yet?

you bastards.... are you trying to get "another one"


go for it sert!!!!!!!!! :funny:


I think it would be a good run. Dont you?

[DustnF]

No bites? SteedaRR must have put the word out. ;)

[Slow ET]

ANDY... where is that napkin again? Someone owes me $100 :lol:

[fatkid]

nah im not ready to run yet. Haven't even got it yet it comes sun. night. I shouldn't have to get the cold air right cause its got the Ram Air hood and ram air right under that so i Dun think i need CAI. But i want exhaust real bead.

[DustnF]

nah im not ready to run yet. Haven't even got it yet it comes sun. night. I shouldn't have to get the cold air right cause its got the Ram Air hood and ram air right under that so i Dun think i need CAI. But i want exhaust real bead.

OK let me know when you are ready. I have a friend with a little neon that is looking for a stock or almost stock f-body to run. Just to see whats up.

[brandboZ28]

Like FloridaZ said, start small with the CAI, exhaust, and free mods. Aftermarket shifter is on up there on the list too. Stay away from the venom thingy, its shit. Also, dont spend all that money on Borla when you can get stuff for WAY cheaper and sounds just as good if not better. I would actually go for a Hooker Aerochamber catback, they sound incredible. If you like the loudmouth sound, go with the Dynomouth and save yourself around $250. I really cant wait to see it, Im excited for ya. If you have and questions about anything, ask and Ill do my best to help ya out.

Also, I would buy some rims for that thing and get rid of the salad shooters but thats just me. ;)

[brandboZ28]

OK let me know when you are ready. I have a friend with a little neon that is looking for a stock or almost stock f-body to run. Just to see whats up.
My Z28 is almost stock.

[500RWHP]

nah im not ready to run yet. Haven't even got it yet it comes sun. night. I shouldn't have to get the cold air right cause its got the Ram Air hood and ram air right under that so i Dun think i need CAI. But i want exhaust real bead.

OK let me know when you are ready. I have a friend with a little neon that is looking for a stock or almost stock f-body to run. Just to see whats up.


I'll run you :twisted: in a couple of years of course :roll:

[DustnF]

OK let me know when you are ready. I have a friend with a little neon that is looking for a stock or almost stock f-body to run. Just to see whats up.
My Z28 is almost stock.


Call Jeffro he can set it up. If you are going to the Dyno we will see you in the morning.

[Signal 12]

hey greg, howd your cam install go????




hehehehehe

OOOOOOOOOOOOOOOOOOO SHHHHHIIIIIIITTT!!!!! MUHAHAHAHAHAHA :fluffy:






sorry for the late reply.

Mike