Bryan02TA wants an Auto, CrazyBosnian says learn to drive [Archive]

CrazyBosnian

01-03-2005, 09:12 PM

to have 2 vehicles (race car and tow vehicle) with the race car beating Bo!! That will take a while b/c Bo is getting mighty fast on me, but that's my goal and i'm sticking to it. :p

If you knew how to fucking drive my race car, you wouldnt be whining like a little bitch about bos slow LT1... :idiot:

Bryan02TA

01-03-2005, 09:35 PM

If you knew how to fucking drive my race car, you wouldnt be whining like a little bitch about bos slow LT1... :idiot:
"race car" eh? You built a fine fucking race car there dumbass. Most people put rear's in their race car, where is this one? Oh, you'd rather fry a SPEC 3 clutch...MY SPEC 3 CLUTCH...fuckface! :p

BTW, race cars have autos, unless you put that in your next one, i'll see you in my rear view.

p33ndude

01-03-2005, 09:39 PM

AK 47 time..:O!!

CrazyBosnian

01-03-2005, 09:43 PM

"race car" eh? You built a fine fucking race car there dumbass. Most people put rear's in their race car, where is this one? Oh, you'd rather fry a SPEC 3 clutch...MY SPEC 3 CLUTCH...fuckface! :p

BTW, race cars have autos, unless you put that in your next one, i'll see you in my rear view.

Race cars have "autos" only when pussys cant drive their 6 speeds-did fine for me wihout a rear. As for me in your rear view, bwahahhahaah, we will put our $$$ where our mouth is when the time comes, and the time is coming very soon for me :wicked: :lol:

Oh and you'd fry a spec 3 worse with a rear and constant dumps faster than the way i did :p

P. S. Dont argue with me bout race cars, especially "your" race car, you will loose :taunt:

CrazyBosnian

01-03-2005, 09:44 PM

AK 47 time..:O!!

lolololol

Bryan02TA

01-04-2005, 05:52 AM

Race cars have "autos" only when pussys cant drive their 6 speeds-did fine for me wihout a rear. As for me in your rear view, bwahahhahaah, we will put our $$$ where our mouth is when the time comes, and the time is coming very soon for me :wicked: :lol:

Oh and you'd fry a spec 3 worse with a rear and constant dumps faster than the way i did :p

P. S. Dont argue with me bout race cars, especially "your" race car, you will loose :taunt:

It's "lose" not "loose", learn some English mothafucka! :taunt:

No way constant dumps would fry a spec 3 more than 5000 rpm featherings.

And this 6 speed did fine for you...for a 6 speed. If it was an auto with a stall, it would be mid 11's baby :headbang:

CrazyBosnian

01-04-2005, 09:57 AM

It's "lose" not "loose", learn some English mothafucka! :taunt:

No way constant dumps would fry a spec 3 more than 5000 rpm featherings.

And this 6 speed did fine for you...for a 6 speed. If it was an auto with a stall, it would be mid 11's baby :headbang:

Yup, i was affraid of this... Once a dumb rustang owner, always a dumb rustang owner... :lol:

P. S. Yes constant dumping will do more than 5000 rpm feathering, as for if it was an auto w/ stall, it would still need the main ingrediant-REAR/GEARS with which u can do the same thing with a 6 spd, so shut up and learn how to drive :wicked:

SS2win

01-04-2005, 11:31 AM

split this thread

jess

01-04-2005, 11:32 AM

split this thread

Bryan and Bosnian are just an old married couple.

brandboZ28

01-04-2005, 11:42 AM

Hey Jess, what are you doing later? ;) :p

CrazyBosnian

01-04-2005, 12:08 PM

Bryan and Bosnian are just an old married couple.

jealous? :wicked:

slmdLS1

01-04-2005, 12:18 PM

Hey Jess, what are you doing later? ;) :p
:funny: :funny:

Bryan02TA

01-04-2005, 04:00 PM

Yup, i was affraid of this... Once a dumb rustang owner, always a dumb rustang owner... :lol:

P. S. Yes constant dumping will do more than 5000 rpm feathering, as for if it was an auto w/ stall, it would still need the main ingrediant-REAR/GEARS with which u can do the same thing with a 6 spd, so shut up and learn how to drive :wicked:
"I am THIS close to raping you!!"
That is all :lol:

Fastz

01-04-2005, 04:39 PM

I think you both need to stop whining...Bryan02TA should have bought an Auto to begin with(like me :wicked: ) and this Crazy-who-lets-this-guy-carry-a-gun-Bosnian should stop bitching about a car he no longer has :owned:

I will be in the 11's shortly so you will all be in my rearview....including Bo.

:secret:

CrazyBosnian

01-04-2005, 04:43 PM

Fastz

01-04-2005, 05:00 PM

West
:funny:

CrazyBosnian

01-04-2005, 05:13 PM

West
:funny:

hahah, welcome to the party!!!

:secret: there might be another Z parked off of Medlock Bridge soon :secret:

Fastz

01-04-2005, 05:18 PM

haha...nice site here...I just stumbled across it and had to join in on the action. Hmmm...might be getting back in the game huh? Well it's about time! Keep me posted on the progress. Z vs. Z :wicked:

Bryan02TA

01-04-2005, 05:49 PM

hahah, welcome to the party!!!

:secret: there might be another Z parked off of Medlock Bridge soon :secret:
Nobody on this board knows where the hell that is.

Also, i don't know who you are FastZ, but i hope you kick alen's ass in a race :lol:

Spinner

01-04-2005, 06:15 PM

I do.

Fastz

01-04-2005, 06:49 PM

Nobody on this board knows where the hell that is.

Also, i don't know who you are FastZ, but i hope you kick alen's ass in a race :lol:

Bryan02TA, I'm a former Mustang owner like yourself...converted over to the LS1 and haven't looked back. I have raced the car you now own in my old 99 GT with 100 shot. Alen and I never went from a stop but from a roll we were pretty even into triple digit speeds...I think we shut down when my nose was at his rear bumper...I had a car load of people to just himself also which may have played a slight role.

Alen will not be so lucky the next time around, and he knows this :wicked:

CrazyBosnian

01-04-2005, 07:01 PM

Bryan02TA, I'm a former Mustang owner like yourself...converted over to the LS1 and haven't looked back. I have raced the car you now own in my old 99 GT with 100 shot. Alen and I never went from a stop but from a roll we were pretty even into triple digit speeds...I think we shut down when my nose was at his rear bumper...I had a car load of people to just himself also which may have played a slight role.

Alen will not be so lucky the next time around, and he knows this :wicked:

The mustang just needed some juice-while the ole TA was a bolt on car only... :D ...As for ur LS1, it is/will be stout, but i dont even have one yet to compare. All i have is my bike :wicked: ...We could always line up what i have :taunt: ...Btw i'm glad you are down here and have what you have, it will just be more of a motivation for me to go faster once i get mine :kinson:

P. S. Ya need to come out with us!!!! :mike:

Fastz

01-04-2005, 07:46 PM

I will admit the Mustang needed a power adder to hang and that bike of yours is sick. I love being down here again. We definitely need to all get together some time. We could all hang out at my house and shoot the shit, play some ping pong and bench race...also I'm planning on being at Silver Dollar on the 22nd or the 29th of this month to test out my new additions...you game?

brandboZ28

01-04-2005, 08:11 PM

also I'm planning on being at Silver Dollar on the 22nd or the 29th of this month to test out my new additions...you game?
I am. :wicked:

Whats up West! Glad to have you here on the site and definatly good to have you back in GA. We do need to hang out though, its been wayyyyy too long. What are these additions to the car youve been talking about? I might have a couple tricks up my sleeve as well to test out this weekend. :secret:

Bryan02TA

01-04-2005, 08:22 PM

well if you are friends with these 2 characters (Bo and Alen), i'm sure i'll meet you sometime soon. I could always use some help defending myself against the king of all assholes....I mean my good buddy Alen :)

Fastz

01-04-2005, 08:26 PM

I am. :wicked:

Whats up West! Glad to have you here on the site and definatly good to have you back in GA. We do need to hang out though, its been wayyyyy too long. What are these additions to the car youve been talking about? I might have a couple tricks up my sleeve as well to test out this weekend. :secret:

Hey Bo! Man it's been forever...I've finally gotten settled in so it'll be like old times again soon. Silver Dollar it is then! I'm good to go on both weekends just hope the weather will be good. I hear you are goin pretty fast these days...but here is what I should have installed by the first race...

3.42 gear
Weld Prostar Fats/skinnies
Subframes
PT4400 :wicked:

All these parts are just sitting in the garage waiting for me to have time to install them...I'll be busy the next few weekends :D

Fastz

01-04-2005, 08:29 PM

brandboZ28

01-04-2005, 08:36 PM

Hey Bo! Man it's been forever...I've finally gotten settled in so it'll be like old times again soon. Silver Dollar it is then! I'm good to go on both weekends just hope the weather will be good. I hear you are goin pretty fast these days...but here is what I should have installed by the first race...

3.42 gear
Weld Prostar Fats/skinnies
Subframes
PT4400 :wicked:

All these parts are just sitting in the garage waiting for me to have time to install them...I'll be busy the next few weekends :D
You just let me know when you need some help and Im there!

Bryan02TA

01-04-2005, 08:50 PM

Yup we've all been friends for a long time... :funny:
I just found out you were the reason Bo couldn't be in my wedding...YOU ASSHOLE!!!

J/K man, i'm sure i'll see you soon enough :)

Fastz

01-04-2005, 09:23 PM

Dang man...I'm sorry about that...everyone wants a piece of Bo I guess :lol: ...we'll for sure meet up sometime this year.

Bo...you can help me grind...fit...grind...fit...grind...fit...only using spacers on the back I think.

brandboZ28

01-04-2005, 09:32 PM

Why are you running spacers out back and not up front? Im running the opposite, spacers on the front and not on the back. Im game for whatever though. :tu:

Bryan02TA

01-04-2005, 09:37 PM

Fastz

01-04-2005, 10:05 PM

Why are you running spacers out back and not up front? Im running the opposite, spacers on the front and not on the back. Im game for whatever though. :tu:

Huh...I was wondering what your setup was...I think the LS1 brakes are bigger in the back which makes a spacer almost necessary unless you wanna grind the shit out of the calipers. I would like to not run spacers at all, especially on the drive wheels but I did buy the extended ARP studs.

Fastz

01-04-2005, 10:06 PM

HAHA, yeah, everybody wants to take a ride on the BONE ROLLERCOASTER!!

:funny:

jonnycracker

01-04-2005, 10:12 PM

Fastz

01-04-2005, 10:47 PM

So West is actually not just a figment of my imagination... :???: Dude I hear all these things, but never actually see you. Has Adam done anything to his TA? 01 TA...? I am can't wait to see what you can do buddy. :D

What's up Segall! Man it has been awhile...Adam has an 01 WS6 6 speed stock and needs to run it at a good track. I'm hoping he comes to Silver Dollar this month...you in? Man your car has gotten quick 8) ...should be a good race between us!

brandboZ28

01-04-2005, 10:59 PM

Youre right, the brakes on a LS1 are bigger but grinding the rears isnt that big of a deal. There are a couple guys on here that have done it. I ground my rear calipers but it only took a little bit with my lil LT1 brakes. There are a couple of writeups on it. Ill look for em. With the longer studs, youre gonna have to put them in while the axles are out of the c-clips when youre gears are getting done but Im sure you knew that. ;)

CrazyBosnian

01-05-2005, 07:45 AM

3.42 gear
Weld Prostar Fats/skinnies
Subframes
PT4400 :wicked:

All these parts are just sitting in the garage waiting for me to have time to install them...I'll be busy the next few weekends :D

I see a big problem with the list, where the hell is the CAM?!?!?!? :scratch:

jess

01-05-2005, 07:54 AM

I see a big problem with the list, where the hell is the CAM?!?!?!? :scratch:

Bryan might have one for him :secret:

93zm6tally

01-05-2005, 09:26 AM

Brian,

Grow a set and leave the cam in. Hell add a vacuum canister if you don't like the idle.

CrazyBosnian

01-05-2005, 01:32 PM

Brian,

Grow a set and leave the cam in. Hell add a vacuum canister if you don't like the idle.

I think he needs to go back to a rustang....My poor poor car :D

Jericho574

01-05-2005, 02:01 PM

Hey Bryan, since everyone claims to cant drive a 6-speed and should have an auto......wanna trade cars :)......or trannys????

Bryan02TA

01-05-2005, 02:24 PM

Hey Bryan, since everyone claims to cant drive a 6-speed and should have an auto......wanna trade cars :)......or trannys????
no, only Alen claims i can't drive a 6 speed. No, not gonna trade cars with ya, or tranny's, and the cam is staying in. I have lots of stuff i'm working on right now :)

93zm6tally

01-05-2005, 02:55 PM

no, only Alen claims i can't drive a 6 speed. No, not gonna trade cars with ya, or tranny's, and the cam is staying in. I have lots of stuff i'm working on right now :)

That's what I'm talking about. :rice:

Fastz

01-05-2005, 03:39 PM

I see a big problem with the list, where the hell is the CAM?!?!?!? :scratch:

Cam is still undecided...I can't seem to decide cause every week I want a different one.

Bo...I would love some clarification on the wheel stud issue...here is what I have heard...with TCS cars you can just pound them out and draw them in with a lug nut just like the fronts...with non TCS cars like mine...you have to take the axles out and have them pressed in.

Now I have also heard that the procedure is the same regardless of TCS...meaning you can just treat it like the fronts and pound them out too. I don't know which way to believe until I get under there and take a look.

Hmm...tech talk in the lounge...is this allowed.

CrazyBosnian

01-05-2005, 03:44 PM

Cam is still undecided...I can't seem to decide cause every week I want a different one.

Bo...I would love some clarification on the wheel stud issue...here is what I have heard...with TCS cars you can just pound them out and draw them in with a lug nut just like the fronts...with non TCS cars like mine...you have to take the axles out and have them pressed in.

Now I have also heard that the procedure is the same regardless of TCS...meaning you can just treat it like the fronts and pound them out too. I don't know which way to believe until I get under there and take a look.

Hmm...tech talk in the lounge...is this allowed.

If i remember correctly, ya can just pound em out, TC or not...

brandboZ28

01-05-2005, 03:46 PM

Cam is still undecided...I can't seem to decide cause every week I want a different one.

Bo...I would love some clarification on the wheel stud issue...here is what I have heard...with TCS cars you can just pound them out and draw them in with a lug nut just like the fronts...with non TCS cars like mine...you have to take the axles out and have them pressed in.

Now I have also heard that the procedure is the same regardless of TCS...meaning you can just treat it like the fronts and pound them out too. I don't know which way to believe until I get under there and take a look.

Hmm...tech talk in the lounge...is this allowed.
Jason, youre right about the TCS and nonTCS cars. I didnt think about that. Lemme see if I can find those write ups to see if they shed any light on the situation.

CrazyBosnian

01-05-2005, 03:47 PM

no, only Alen claims i can't drive a 6 speed. No, not gonna trade cars with ya, or tranny's, and the cam is staying in. I have lots of stuff i'm working on right now :)

There we go, finally gowing some balls :headbang: ...Now remember, whenever you want to go a few tenths faster, you just let the original owner drive his car :wicked:

brandboZ28

01-07-2005, 11:17 AM

Jason, heres a writeup on the studs that I found. It doesnt make much sense to me without getting under my car and looking but hopefully youll be able to make something of it.

http://frrax.com/rrforum/index.php?act=ST&f=3&t=983&

jlaw

01-07-2005, 05:36 PM

Brian,

Grow a set and leave the cam in. Hell add a vacuum canister if you don't like the idle.

What he needs to do is get a real tune. My cam is just as extreme, more lift, etc, and I have NO problems at all. I start it up in the morning, it finds idle immediately, and off I go. No need to let it warm up for 5-10 minutes, just keep it under 2500rpm and it's fine. No bucking, no surging, nothing.

Bryan- I can get you a kick ass tune by the same guy who did mine (gomer) for ~$200 plus dyno time, with free re-tunes. If you're interested, send me a PM.

93zm6tally

01-08-2005, 04:08 PM

What he needs to do is get a real tune. My cam is just as extreme, more lift, etc, and I have NO problems at all. I start it up in the morning, it finds idle immediately, and off I go. No need to let it warm up for 5-10 minutes, just keep it under 2500rpm and it's fine. No bucking, no surging, nothing.

Bryan- I can get you a kick ass tune by the same guy who did mine (gomer) for ~$200 plus dyno time, with free re-tunes. If you're interested, send me a PM.

Yep. Tuning works. I run a very small cam myself so tuning really isn't required.

8)

brandboZ28

01-08-2005, 05:14 PM

Yep. Tuning works. I run a very small cam myself so tuning really isn't required.

8)
While a tune might be what he needs, it isnt what he is going to do to fix his problem. Some people may think he is going backwards, some may not but all in all, Im sure Bryan is making the best desision for himself, and maybe his wife too. Lemme know when everything goes down, Bryan. :)

Bryan02TA

01-08-2005, 05:23 PM

While a tune might be what he needs, it isnt what he is going to do to fix his problem. Some people may think he is going backwards, some may not but all in all, Im sure Bryan is making the best desision for himself, and maybe his wife too. Lemme know when everything goes down, Bryan. :)
You know it Bo ;)

And Jon, i will definitely keep that in mind.