PDA

View Full Version : Had the SS Dynoed


Chilled4lyf
02-17-2005, 05:02 PM
Well before I start to modify my car, I figured no matter what the car made after my planned mods, it'd be useless without some form of baseline numbers. So I went to South Georgia Corvette, and linked up with Aaron, who's really cool, not to mention there were a few sick rides there. The car is a 2000 SS that is mechanically stock, the only mods that have been done to the car is just, shocks, springs and swaybars. So I wouldn't be dissappointed, I made a personal guess that it should put down at least 290-295, but I'd be happy if it made 298-303, and as for torque, I made a guess at 310-320. Lets just say I'm pretty stoked for putting down the numbers I did :D with two back to back runs. Now let the modding begin. :wicked:
Chilled4lyf
02-17-2005, 05:05 PM
The car is a six speed, with the stock 10bolt 342 gears.
TylerGT
02-17-2005, 05:10 PM
damn nice numbers.
Slow ET
02-17-2005, 05:10 PM
Good numbers but most use SAE as the standard measurement unit. For a comparison, my 02 dyoned 332/351 STD with a cutout. STD numbers tend to be higher than SAE.

On a side note, looks like you have a little knock around 4600
Chilled4lyf
02-17-2005, 05:19 PM
DO you think so? I guess it'll be fix with once I'm finished with my modifications and I have the car tuned. :shrug:
jlaw
02-17-2005, 06:24 PM
Good numbers but like Adrian said, SAE numbers are the ones that nearly everyone goes by. Did Aaron give you those?
slmdLS1
02-17-2005, 06:27 PM
nice numbers!!
sstony
02-17-2005, 06:51 PM
good #'s man. that set up that aaron has is so cool. what stuff are you planning on doing?
Bryan02TA
02-17-2005, 09:09 PM
nice numbers, call aaron and he can fax you the SAE numbers.
Chilled4lyf
02-17-2005, 09:10 PM
Good numbers but like Adrian said, SAE numbers are the ones that nearly everyone goes by. Did Aaron give you those?

Yes Aaron gave me those numbers. Now I have never dynoed a car before so I'm a little lost..... which numbers did I receive from Aaron SAE or STD?
brandboZ28
02-17-2005, 09:13 PM
You got the STD #'s. Its on your dyno sheet. ;)
Greg Kulbick
02-18-2005, 07:57 AM
Nice numbers. Good meeting you last night.
slmdLS1
02-18-2005, 09:34 AM
Nice numbers. Good meeting you last night.

yes indeed. very clean car too!
Chilled4lyf
02-18-2005, 09:45 AM
Nice meeting you guys too last night, you guys are a good crowd who all share a love for VW :taunt: ,J/K.
sstony
02-18-2005, 10:21 AM
you guys are a good crowd who all share a love for VW :taunt: ,J/K.
Yeah man, VW's RULE ALL--it was nice to meet you. with your love for speed and cars, you'll fit in just fine here. now tell jared to make it out with his slow and dented up rustang :lol:
FLYNLOW92rs
02-18-2005, 03:39 PM
Where is South Georgia Corvette? I'm heading up to Albany next week and wouldn't mind stopping by to dyno the car?

Thanks