LT-bored

[Slow ET]

http://www.stang.cc/tmcaalbums/slowet/P1010478.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010427.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010436.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010455.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010463.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010441.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010461.jpg

http://www.stang.cc/tmcaalbums/slowet/P1010470.jpg

[fatkid]

Tear tear......Fuckin Awesome though man, Let the Games begin...:twisted



:dominate: :whodad:

[Slow ET]

About five hours of time including breaks. Did the all the disassemble my self and my brother helped with the lift part. All in all it was very fun and dirty. LS1 edition in a few weeks :96s10:

[lsevenl]

wow that's crazy. We'll be disassembling mine in a couple weekends, I can't wait!

[Injected1]

so what exactly are you doing with the Lt1?

[sstony]

good stuff man

[brandboZ28]

Yippee! Theres my tranny!!!! :lol:

[Tally TransAm]

pimpalicious

[Slow ET]

so what exactly are you doing with the Lt1?

Well the motor and trans are being sold. My brother purchased the motor, just need to sell the T56 sometime <--- (ATTN: BO)

Might stick another LT1 or SBC in there... havent decided yet. Whichever it is, the benchmark is 9.80s NA :slowet:

[Tally TransAm]

sbc, dfi, glide . . .

what the deal with the ls1 edition

you taking the motor outta the hawk??

[Slow ET]

If i stick with the LT1, about 381-388 cubes, DFI, 4bbl TB, th400... the SBC woudle be a carbed ~406-427 cubes. Yes the motor will come out of the orange ride... cam, headers, clutch

[TurboL67]

damn. that wing IS functional.

[brandboZ28]

just need to sell the T56 sometime <--- (ATTN: BO)

Im workin on it. :joystick:

[sstony]

Im workin on it. :joystick:
for the yellow car?? if so highway run after you swap.

[brandboZ28]

for the yellow car?? if so highway run after you swap.
Haha, its gonna be a while before I do the swap. Im gonna do it right so Im gonna take my time. I just gotta get some cash together to take it off of Adrians hands soon. But once I get it all done, Ill let you walk me on the street once again. :lol:

[T]

looks like fun, should have gave me a ring. I havent touched a car with 8 cylinders in a long time :(

[slmdLS1]

why you hackin on the hawk?!

[brandboZ28]

why you hackin on the hawk?!


Psstt. Post 11.

http://www.tallahasseemusclecar.com/forum/showpost.php?p=106748&postcount=11

[slmdLS1]

Psstt. Post 11.

http://www.tallahasseemusclecar.com/forum/showpost.php?p=106748&postcount=11


ah, didnt know what that was for, thought he was motor swapping it.

[towelie]

It kind of a shame to see that motor out after it took us forever to get those dam headers on

[brandboZ28]

It kind of a shame to see that motor out after it took us forever to get those dam headers on
I know the feeling. I put them on and then had to take them back off. :idiot: At least Im getting something of that car back. :tu:

[93zm6tally]

Good job Adrian. I do the same thing on mine to change the plugs.

BTW is that a home built engine dolly, looks like just what I need.

[Slow ET]

T i can call ya for the LS1 removal... but its gotta be on a Thursday/Friday :joystick: When i removed the headers, i wondered how the fack yall put them fackers on. It was a pain with the motor out of the vehicle.

Yeah, the dolly is just some 2x4s and 2x6s and some 330lb casters from Harbor Freight. It took a while cause i had to firgure out what to dissamble/remove/disconnect from the vehicle. I think i can do it in 2 hours with another set of hands. I also picked up a 4L60E for the motor...

[towelie]

:joystick: When i removed the headers, i wondered how the fack yall put them fackers on. It was a pain with the motor out of the vehicle.


I took us longer than I want to admit but we could have pulled the motor and done it quicker.

[fatkid]

It really didnt take us that long to get the LT's in it just took us forever to get the damn stock manifolds out.

[Spinner]

It really didnt take us that long to get the LT's in it just took us forever to get the damn stock manifolds out.

Thats the fucking truth. LS1s are easier because they're not as damn rusted stuck as the old shit lt1 manifolds.

[brandboZ28]

Thats the fucking truth. LS1s are easier because they're not as damn rusted stuck as the old shit lt1 manifolds.
Ive never had a problem getting exhaust manifolds off. Done it on a few cars too. :shrug:

[fatkid]

Ive never had a problem getting exhaust manifolds off. Done it on a few cars too. :shrug:
We snapped all 6 bolts holding the manifolds to the stock Y clean off when takin them out. Bolts were just a pain to get to also from top or bottom. Then whoever had the car before me snapped a bolt in the head on the driver side 2nd from last in the back.

[Spinner]

Its the manifold to Y bolts that have given me headache.

[brandboZ28]

Its the manifold to Y bolts that have given me headache.
I just break them bishes off. :lol: I love air tools! :twisted:

[fatkid]

Socket wrench with 3 foot PVC extention on it > Air tools :flip2:

[brandboZ28]

Socket wrench with 3 foot PVC extention on it > Air tools :flip2:
Not where I come from. :lol:

[fatkid]

I know im just poor.

[SloNLo_350]

Socket wrench with 3 foot PVC extention on it > Air tools :flip2:
Hockey Stick of TORQUE!!! > *

[tedness]

Hockey Stick of TORQUE!!! > *

so chase....

you can live in a car but you can't race a house, rite?

[88leadsled]

PB blaster is your friend. :D

[SloNLo_350]

o chase....

you can live in a car but you can't race a house, rite?
Congratulations...
You have been awarded the "Most Retarded Post" award.
www.tedness.isretarded.com

[tedness]

Congratulations...
You have been awarded the "Most Retarded Post" award.
www.tedness.isretarded.com
wow what'd that take you, like an hour in photoshop? ;)

[SloNLo_350]

wow what'd that take you, like an hour in photoshop? ;)
click the link... tard

[tedness]

touche cosmot.

[SloNLo_350]

touche cosmot.
:wtf: I assume you mean "Cost Mart."

Please don't speak (or post) anymore.

[Slow ET]

OK... a break from the retards. Got this nice little notice on my front door this morning. Im not upset at the fact that the code enforcement idiot displayed NO 'same team courtesy'. Im pissed at the fact that i have ONE day to fix the problem. :wtf: I just have to replace the kmember on the car so it sits on all four tires. :slowet:

http://www.stang.cc/tmcaalbums/slowet/P1010484.jpg

[T]

gotta love it. seen more than my fair share of those types of notices. BTW you can thank one of your neighbors for that. you can be almost 90% sure someone called them on you.

PS if you need some emergency help I can head over there tonight.

[slmdLS1]

time for an enclosed canopy