piston got in a fight with rod

[lunati397]

yeah when you hear a pop then the engine shakes real bad smoke starts pouring out this could be your problem too

http://memimage.cardomain.net/member_images/6/web/546000-546999/546702_56_full.jpg http://memimage.cardomain.net/member_images/6/web/546000-546999/546702_57_full.jpg

All is good though because it out with the old and in with the new the only downfall is with gas prices the way they are and 33 more cubes I will hate filling up even more but it wont stop me
http://memimage.cardomain.net/member_images/6/web/546000-546999/546702_58_full.jpg

[TurboL67]

I'll be home next weekend to help your bitch ass with that install!

[brandboZ28]

NICE!!! What kinda setup is your 383? Heads/cam/crank/etc?

[lunati397]

383 all forged Golen Short block cloyes double roller chain melling HV pump Miloden stroker 7 qt oil pan with full length windage tray custom cam ported heads and intake 1.6 roller rockers hardened pushrods oem new lifters unlimeted custom tunning by madz28 and a spec stage 3

this is all in a third gen camaro and that is a LT4 intake you can very easily make them fit I had it laying around so i saw if i could make it work and it does with very little effort but all it has over the lt1 intake is the runners are raised a bit more and the injector placement is alittle diff

[Bullhead00]

Can you say nasty?

[4348rd]

that will make her move

[scooby]

well they say some bad things thing happen for the good hope you get her up and runnin soon though

[sstony]

man that new engine looks hella nice. keep us posted on the progress and don't let danny work on it cuz he's a slow ricer. i'm starting to become a huge fan of building up 3rd gens.

[4348rd]

man that new engine looks hella nice. keep us posted on the progress and don't let danny work on it cuz he's a slow ricer. i'm starting to become a huge fan of building up 3rd gens.
come get a 3rd gen out my yard 200.

[lunati397]

i would have had it in last night up and runing but with the miloden pan I can no longer just slip the engine in like I used to because it wont clear the k member to slide on the tranny and i cant angle the tranny up anymore so last night MY saturday night i pulled the tranny from the engine bay and connected it to the engine and ill slid them in together

[scooby]

when you get that thing runnin you need to bring it to tally one time

[lunati397]

might have to head out there to finish Dans car hes working like an old lady with arthitis having a stroke by the time he is done he will have to stay there for next year of school

[TurboL67]

might have to head out there to finish Dans car hes working like an old lady with arthitis having a stroke by the time he is done he will have to stay there for next year of school


Punctuation, Adam!!

[lunati397]

thats why you go to college

[scooby]

:funny: